Material: Insulation Materials
Power Supply: Hard-Wired
Acceptable Voltage Range: Below 50 V
See more
Learn about dimensions
Solar Charge Controller 10A 20A 30A 60A 100A Material: PVC Color: Blue Current Output: 30A Voltage: 12V/24V Power Source: Solar Size: 13.4CM x 7CM / 5.28'' x2.76'' Package Include: 1X Solar Charge Controller
Product Features: 1. Built-in industrial micro controller. 2. Big LCD display screen, adjustable charge and discharge parameters, with power-off memory and other functions. 3. Fully 3-stage charge management. 4. Built-in short circuit Safeguard, open circuit Safeguard, reverse connection Safeguard, overload Safeguard. 5. Dual USB output, the maximum current is 2.5A, support phone charging. 6. Dual mosfet reverse current Safeguard, low heat production
Safety Instruction 1. Make sure your battery has enough voltage for the controller to recognize the battery type before first installation. 2. The battery cable should be as short as possible to minimize loss. 3. The regulator is only suitable for lead acid batteries: OPEN, AGM,GEL. It is not suitable for nickle metal hydride, lithium ions or other batteries. 4. The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator
Characteristics: 1. Built-in industrial microcontroller. 2. One-key configuration, digital display, automatic memory function. 3. Fully pwm-load management load. 4. Build-in short circuit Safeguard, open circuit Safeguard, reverse Safeguard, over load Safeguard 5. Dual mosfet Reverse current Safeguard, low heat productions
Connection of the system: 1. Connect the battery to the charge controller plus and minus. 1 will be displayed, in case of detecting 12 V battery, 2 in case of detecting 24 V battery. 2. Connect the photovoltaic module to the plus and minus regulator. 3. Connect to the consumer for the charge controller plus and minus. The reverse order applies when uninstalling! An incorrect sequence order can damage the controller!